How To Make A Case For Your Phone

Download Article

Cell phones come in many shapes and sizes, and finding a instance to fit your phone tin sometimes exist tricky and expensive. Luckily, making a custom cell phone case is easier than yous'd think. You can easily make a example at home using a hot glue gun or some silicone and cornstarch. You tin as well make a simple skid embrace out of felt. If yous already take a plastic case, then why not decorate it to make it stand out?

Things You lot Should Know

Create your own phone case using hot mucilage, silicone that you tin can purchase from a home improvement or crafts store, or felt.
You tin purchase many of these items cheaply, but the steps to brand the cases functional are a little more intricate.
Decorate a plastic instance that you already have with puffy paint, dimensional fabric pigment, or lace.

1
Tape a template to the back of your telephone, if desired. Making a smooth case is difficult with hot glue, then near people cull to do patterns, such as swirls or mandalas. Y'all can free-paw the pattern, or you lot tin can trace information technology. If you desire to trace it, do the post-obit:^[1]
- Trace your telephone onto a sheet of paper.
- Draw your pattern using a black marker. Make certain the design touches the sides.
- Cut out the template along the outline.
- Record the template to the dorsum of your phone.
2
Wrap your phone like a present with parchment paper. Cut a canvass of parchment paper that'southward about twice the size of your phone. Place your phone on superlative, with the screen facing up. Wrap the paper over the side edges of your phone, then secure them with a slice of record. Wrap the top and bottom edges, and secure them with tape likewise.^[2]
- Wrap your telephone as tightly as you can.
- Make sure that the telephone is turned off first to prevent overheating.
- Make sure that yous are taping everything on the forepart of the telephone.
Advertisement
iii
Marker off the camera, sockets, and buttons with a pen or colored pencil. These volition be your guidelines so that y'all don't accidentally cover them with hot glue.^[3]
- Make sure that the color you use shows up against your phone.
iv

Outline the sockets, buttons, and camera. This also includes the speaker and mic holes as well. If y'all cover them upwardly, you don't be able to use your phone properly.^[iv]
5

Fill in the side edges. Make sure that you brand them overnice and thick. Also, make certain that you avoid the buttons and sockets.^[five]
6

Make full in the back. Again, hot glue is non the best medium to create a perfectly smooth case, so your best bet is to brand a texture of pattern. Whichever you cull, make sure that all the lines connect to the sides of the phone every bit well as to each other.^[6]
vii

Outline the front. You can just describe a sparse line effectually the front of the telephone, right next to the side edge. You tin can as well make a serial of tiny dots instead. This will give your case a lip and help information technology stay on your phone.^[seven]
8

Remove the case and the parchment paper. Once the glue has hardened, skin it off of your phone. Remove the parchment paper from the telephone next. At this point, it would exist a adept idea to test the case on the telephone. If there is any mucilage covering a button, socket, etc., then y'all can cut it away with a craft blade.
nine

Paint the instance, if desired. In one case you are happy with the example, take information technology off of the telephone. Pigment the outside with boom polish, and then let the smoothen dry.^[8] If you want the example to be a solid color, you can use spray paint instead.^[nine]

1
Put on plastic gloves and protect your work surface. Cover your counter with plastic wrap, parchment newspaper, or wax paper. You tin besides work on top of a marble counter or a glass sheet instead.
- Endeavor to work in a well-ventilated area. Silicone tin can accept a strong scent.
- The silicone used in this method is non the same equally hot gum.
two
Measure out your cornstarch and clear silicone. Pour some cornstarch onto a smooth counter or into a glass bowl, then clasp some articulate silicone onto it. The measurements don't have to be precise; y'all only want to take more cornstarch than silicone. Plan on using most 5 tablespoons (50 grams) of cornstarch and 2 to 3 tablespoons (30 to 40 grams) of silicone.^[ten]
- Make sure that y'all are using clear silicone. Y'all tin find it in dwelling house improvement stores. It comes in a syringe.^[11]
- If you tin can't find cornstarch, look for cornflour. Y'all can as well utilise potato starch instead.
3

Consider calculation some color. You don't have to do this, only it a adept way to make your phone instance look more interesting. If you don't do this, your phone case will look white. You lot use a few drops of liquid dye, liquid watercolor, food coloring, or acrylic paint.
4

Knead everything together until the silicone turns to dough. Y'all will need to knead it about 20 times or so. You won't selection up all of the cornstarch, which is normal. The dough may await crumbly at first--merely keep kneading!
v

Roll the dough into a flat sail. You lot can do this with a rolling pivot, a drinking glass, a wine bottle, or fifty-fifty a spray paint can. Keep rolling until you accept a canvas a little larger than your telephone. It should be near ⅛ inch (0.32 centimeter) thick.
6

Place your phone on meridian of the canvass. Brand sure that your screen is facing upwardly, and you have equal amounts (or close to it) of dough sticking out over each side.
vii

Wrap the dough over the sides and height of your phone. Slide a paint spatula nether the dough, and then elevator it upward and fold the dough over the sides of the phone. Smooth out whatsoever creases or wrinkles; try to be as peachy every bit possible.^[12]
8
Use stamps to indent designs, if desired. Flip your phone over and grit it with cornstarch. Use a postage to indent designs into it. You can also utilise cardboard cutouts instead to create your ain, unique designs. Elevator the stamp away when you are done.^[13]
- If you want to make a quilted design, let the silicone harden for about 10 to twenty minutes, then grit information technology with cornstarch. Apply a pocketknife to make cross-crossing diagonal lines in a diamond/quilted blueprint.^[fourteen]
9
Allow the silicone dry out before removing it. How long this takes depends on the type of silicone you used and the weather status. Information technology may have just two hours, or it may have 24 hours. Once it is dry and solid to the touch (y'all tin can't paring it), pull information technology off of your phone.
- If the example is dusty inside, wipe information technology down with a damp cloth.
10

Trim the excess silicone away from the front. Cut information technology about 7 millimeters abroad from the side edges, and 1 centimeter away from the top and lesser edges.^[xv] Alternatively, yous can cut along the indentations caused by the seam between the phone's screen and example.
11
Cut out whatever indentations. If yous were to look inside your cell phone case, you'd encounter little indents caused by the camera, flash, buttons, and sockets. Cut all of these out using a abrupt arts and crafts blade.^[16]
- You can also cleave a rectangle or trapezoid into the top and/or bottom edge for the speaker instead of cutting out a slot.^[17]
12

Sand the instance smooth, if desired. You can apply more raw silicone on top if you desire to, and then smooth information technology out with a paint spatula or popsicle stick.^[18]
thirteen
Paint the stamped areas with nail polish, if desired. Cull a colour that goes well with your instance. Metallic colors, such every bit silverish, work particularly well!^[19]
- You lot can brand more shapes out of silicone separately, let them dry, paint them with nail shine, so glue them to the case with a drop of clear silicone.^[20]

Advertizing

i

Cutting a piece of felt in half widthwise. If you lot want a thicker phone case, use ii pieces of felt instead. They can exist the same color or contrasting colors.^[21]
two

Cutting the pieces ½ inch (1 centimeter) larger than your telephone. Identify your phone on pinnacle of the first piece of felt. Trace effectually it using a ½-inch (1-centimeter) edge. Cutting the felt out, then use it as a template for the other piece(due south).^[22]
3

Place your phone between the two pieces of felt. Make certain that all of the edges and corners are aligned. If y'all are making a lined instance, with two dissimilar colors of felt, choose ane color to exist on the within, and the other color to be on the outside.^[23]
4

Pin the pieces of felt around your phone. You lot only demand to pivot the lesser and ii side edges; leave the top border open. Try to pivot the felt as tightly around your phone as you lot can. The fit volition be snug at first, but it will eventually loosen upward.^[24]
5
Remove your phone and sew along the pinned edges. Employ the pins equally a guide as you sew. Your seam assart will vary, depending on the thickness of your phone. You can do this on a sewing motorcar or past hand.^[25]
- If y'all are doing this by hand, consider using embroidery floss in a contrasting colour.
- If y'all are doing this on a sewing machine, backstitch at the start and end of your sewing.
6

Trim downwards your seam allowances. Try to cut every bit close as you can to the stitching, about ⅛-inch (0.3 centimeters).^[26] For a more than unique look, use pinking shears instead.

1

Buy a plain cell telephone case that fits your phone. A clear case will work the all-time for this, only you tin can use a colored 1 depending on the design that yous pick. Once y'all have your case, cull one of the decorating ideas from the listing below.
2

Decorate a plain case with puffy paint. Buy some puffy or dimensional material pigment from the art store. Utilise it to draw designs on the outside of your case. Let the paint dry completely earlier putting information technology onto your phone. Smashing design ideas include dots, spirals, zigzags, and chevron.^[27]
iii
Add lace to the within of a clear fabric case. Trace the front of the case onto a piece of lace. Cut the lace out, and then coat the within of the case with decoupage gum. Press the lace into the glue, then coat information technology with some other layer of decoupage glue. Let the glue dry, and then cut out the camera pigsty with a craft bract.^[28]
- Make sure that the glue is clear and glossy.
- Add a piece of cloth on top of the lace for a layered result.
4
Wrap washi tape around a colored case. Cull a solid-colored case in a color that y'all similar. Buy some washi tape in coordinating colors or patterns. Wrap the tape around the case, including the sides. Be sure to leave some space between each slice so that the case's color peeks through. Cut out any socket/speaker/photographic camera holes with a arts and crafts blade.^[29]
- Y'all tin discover washi tape in the scrapbooking department in an arts and crafts store.
- Effort a chevron design for something more interesting.
5
Embrace a articulate example with patterned washi tape for a solid effect. Lay down strips of washi tape over the back of a jail cell phone case. Make sure that the edges affect and the patterns align. Flip the phone over and trim away any backlog tape hanging over the sides. Cut out the camera hole besides. Finish off past blanket the outside of the example, include the sides, with articulate, sleeky, decoupage glue.^[thirty]
- Yous can lay the tape down horizontally or vertically.
- Exercise not cover the sides of the phone case.
6
Add scrapbook paper to the within of a clear prison cell phone case. Trace the case onto a slice of scrapbook paper, then cut it out. Coat the inside of the instance with articulate, decoupage gum. Press the paper blueprint-side-down into the glue. Let the mucilage dry, then cut out the photographic camera hole with a arts and crafts blade.^[31]
- You can also use patterned, cotton fiber fabric instead.

Add together New Question

Question

How can I decorate the embrace?

Anyway you like! You could use atomic number 26 on patches with your initials, buttons, feathers, or anything else you tin can recall of!
Question

How do I brand a telephone case that reflects light?

Y'all could glue a small mirror on it with hot mucilage. They probably accept what you'll demand at a arts and crafts store, like Michael's or Hobby Lobby.
Question

Is at that place a no-sew version for people without sewing materials?

Encounter more answers

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Cut fun shapes out of felt, and so hot glue them to a felt phone case.^[32]
Decorate your phone case further with super gum and rhinestones.
Coat your telephone instance with decoupage glue, then sprinkle extra-fine glitter onto it. Seal it with another layer of decoupage glue.

Prove More Tips

Thanks for submitting a tip for review!

Things You'll Demand

Hot glue gun (low temp)
Hot gum sticks (low temp)
Cell Telephone
Parchment newspaper
Record
Smash smoothen or spray pigment (optional)

Clear construction silicone
Plastic gloves
Cornstarch, cornflour, or potato starch
Cell phone
Pigment spatula
Arts and crafts blade
Plastic wrap, parchment paper, or wax paper
Glass, spray paint can, or rolling pivot
Stamps (optional)
Nail polish (optional)

Prison cell telephone
Felt
Pair of scissors
Needle
Thread
Sewing pins
Sewing machine (optional)

Plastic cell phone instance
Decoupage glue, fabric, washi tape, etc.

Virtually This Commodity

Thanks to all authors for creating a page that has been read 391,469 times.

Is this article up to date?